VESA Mounting
If you choose to use your own mount, remove the four M4 x 10
screws from the back of the UAP‑StadiumXG and detach the
pre‑installed mount.
The 8‑hole mounting pattern on the back of the
UAP‑StadiumXG follows the VESA MIS‑D standard and can be
used with mounts that comply with this standard. Use either
the 100 x 100 mm or 75 x 75 mm square hole pattern with
M4 x 10 screws.
75 mm
100 mm
*640-00357-01*
640-00357-01
