UniFi AP-AC PRO Setup Guide | May 15, 2019 | 1
Confidential. © 2019 Squirrel Systems. All rights reserved.
1
O
VERVIEW
The UniFi AC Pro AP (model UAP-AC-PRO) is a gigabit, 802.3af-powered access point (AP) with unlimited
scalability under one central controller. This AP is suitable for high-density network traffic requiring high
uptime and low latency, and allows for remote access to monitor and upgrade deployed devices.
This document covers setting up the software and network on the AP and wireless client devices for use as a
Squirrel Mobility network. It does not cover configuring the AP for use with a UniFi Cloud Key or UniFi
Controller management station as these devices are not yet certified by Squirrel. These devices may be
integrated with the AP into a full-scale network solution at a later date, at which point this document will be
updated to include them.
For mounting setup instructions, refer to the
UniFi AC Pro AP's Quick Start Guide
, included in the AP's
packaging.
2
R
EQUIREMENTS
2.1
Hardware / Network
l
A separately-installed router or switch.
l
A DHCP-enabled network (for the AP to obtain an IP address to broadcast to wireless clients).
l
If the router or switch is not 802.3af/802.3at PoE+ compliant, a power-over-ethernet (PoE) converter is
required to power the device.
2.2
Software
l
Linux, Mac OS X 10.11 (or above), or Microsoft Windows 7/8/10
l
Java Runtime 1.8+
l
Google Chrome
3
H
ARDWARE
O
VERVIEW
3.1
LED Legend
LED Colour
Status
White
Factory default, waiting to be configured or integrated.
Flashing White
Booting up or initializing.
Alternating White/Blue
Device is busy, typically updating. Do not unplug.
Blue
Device has been integrated successfully and is working normally.
Flashing Blue
When you click "Locate" in the UniFi Controller software, the AP will quickly
flash blue.
Blue with Occasional
Flashing
Device is isolated with no uplink.
