RJ45 (Ports 1 - 8)
RJ45 (Ports 9 - 16)
SFP (Ports 17 - 18)
Reset Button
Power Port
Green
Link Established at 1 Gbps
Flashing Indicates Activity
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at PoE output.
RJ45 ports support 10/100/1000 Ethernet connections.
Hot-swappable SFP ports support 1 Gbps connections.
This button serves two functions for the UniFi Switch:
Restart
Press and release the Reset button quickly.
Restore to Factory Default Settings
Press and hold the Reset button for more than ve
seconds.
Connect the included Power Cord to the Power port.
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit:
Note:
Although the cabling can be located outdoors, the UniFi Switch itself should
be housed inside a protective enclosure.
Hardware Installation
1.
USW-16-POE Quick Start Guide
