Flashing White
Initializing.
Heartbeat Flashing White
Device is being reset to factory defaults.
Blue
Indicates the device has been successfully adopted
into a network and is working properly.
Rotating Blue
Motion detected.
Alternating White/Blue
Firmware upgrade in progress. Device is busy; do not
touch or unplug it.
Repeating Off/White/Blue
Recovery mode.
Flashing Red
Recording.
Red
Device failure; network error.
If this occurs, we recommend rebooting the device.
Before You Begin
Remove the sticker from the bottom of the Mounting Base.
Installation Overview
To install the camera, please follow the instructions of the following sections in this
order:
1.
Hardware Installation
2.
Connecting Power
3.
UniFi Protect App
Create PDF in your applications with the Pdfcrowd
HTML to PDF API
PDFCROWD
All manuals and user guides at all-guides.com