Audio In/Out Connection
The Audio In/Out Connection provides one-channel output
and two-channel (stereo) input. Use the included terminal
block to connect your audio wires. The audio wires should be
20 - 28 AWG, solid single-core wires.
Speaker
8Ω, 1W
2 Channel
Line-In
Audio Wiring Diagram
1. Insert a stripped wire into the corresponding hole of the
terminal block.
2. Slightly pull on the wire to ensure it is locked into the
terminal.
Note:
To remove a wire from the terminal block,
push in the orange release button below the wire
and pull the wire out.
