background image

Returns

No Products will be accepted for replacement or repair without obtaining 
a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS 
during the warranty period, and the Products being received at UBIQUITI 
NETWORKS’ facility freight prepaid in accordance with the RMA process of 
UBIQUITI NETWORKS. Products returned without an RMA number will not 
be processed and will be returned freight collect or subject to disposal. 
Information on the RMA process and obtaining an RMA number can be 
found at: www.ubnt.com/support/warranty.

Disclaimer

EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI 
NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, 
SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM 
AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, 
EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, 
REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, 
ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, 
SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS 
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY 
WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR 
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. 
BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR 
ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE 
TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING 
THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE 
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS 
AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS 
FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD 
PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, 
DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT 
CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY 
OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant 
that the operation of the Products will be error-free or that operation will 
be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible 
for damages or claims of any nature or description relating to system 
performance, including coverage, buyer’s selection of products (including 
the Products) for buyer’s application and/or failure of products (including 
the Products) to meet government or regulatory requirements.

Summary of Contents for UVC-Pro-C

















Reviews: