Activating an Integrated Tool Tag
Activating an Integrated Tool Tag
The yellow LED on the head unit slowly increases in brightness, indicating that the tag has
been activated. After a few seconds the LED starts flashing to indicate that it is
communicating with the DIMENSION4 Real-time Location System.
3. Replace the front case of the tag by connecting the four screws.
Checking that a Tool Tag is Activated
To check that a Tool Tag has been activated, insert a paper clip or wire on the side of the unit for
less than 3 seconds.
If the LED is constantly lit when you press the button, the tag is still in the deep sleep (deactivated)
state.
If you want to activate the tag, repeat the procedure, pressing the button for more than 3
seconds.
11
