background image

EVK-L20, EVK-L21 - User Guide 

UBX-14000422 - R03 

 

 

 

 

Page 2 of 17

 

 

Document Information 

Title 

EVK-L20, EVK-L21 

Subtitle 

TOBY-L200, TOBY-L210  
LTE/DC-HSPA+/EGPRS  
Cellular evaluation kit 

 

Document type 

User Guide 

 

Document number 

UBX-14000422 

Revision, date 

R03 

27-Nov-2014 

Document status 

Early Production Information 

 

Document status explanation 

Objective Specification 

Document contains target values. Revised and supplementary data will be published later. 

Advance Information 

Document contains data based on early testing. Revised and supplementary data will be published later. 

Early Production Information 

Document contains data from product verification. Revised and supplementary data may be published later. 

Production Information 

Document contains the final product specification. 

 

This document applies to the following products: 

Name 

Type number 

Modem version 

Application version 

PCN / IN 

EVK-L20 

EVK-L20-00S-01 

09.71 

A01.15 

N/A 

EVK-L21 

EVK-L21-00S-01 

09.71 

A01.15 

N/A 

 
 
 
 
 
 
 
 
 
 
 
 
 

u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in 
whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or 
any part thereof without the express permission of u-blox is strictly prohibited. 
The information contained herein is provided “as is” and u-blox assumes no liability for the use of the information. No warranty, either 
express or implied, is given, including but not limited, with respect to the accuracy, correctness, reliability and fitness for a particular purpose 
of the information. This document may be revised by u-blox at any time. For most recent documents, visit www.u-blox.com. 
Copyright © 2014, u-blox AG 
u-blox® is a registered trademark of u-blox Holding AG in the EU and other countries. 

Trademark Notice 

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 
All other registered trademarks or trademarks mentioned in this document are property of their respective owners. 

 

Summary of Contents for EVK-L20


















Reviews: