4.4 Transmitter mode settings
Enter the X-Hubsan home interface and tap the Settings cog, followed by the Controller tab. You
may then adjust joystick settings.
4.5 Horizontal Calibration
If during takeoff or flight the aircraft drifts, lifts off unevenly, perform a horizontal calibration. Tap
the Settings cog, followed by "Other". Select "Horizontal Calibration" and allow the aircraft to
calibrate itself. Calibration is complete when all 4 LED indicators stop flashing. It is recommended
that users wait for 15-20 seconds after the calibration is completed before flying again.
4.6 Headless mode
Tap the compass icon to activate Headless mode.
The aircraft will set the direction its head is
pointing at the time of activation as the default
"forward" direction in Headless mode.
14
Parameters
Controller
GPS accuracy test
Timeout GPS accuracy test
Bind aircraft to current device
Novice guide
新手指引
(5~30s)
10
Headless
mode
Virtual joystick shows fixedly
on
off
Joystick Mode
mode2
mode1
Controller
Map
Map
Relay
Others
Parameters
Others
Relay
