(1) Enter the X-Hubsan flight interface.
Follow the APP’s on-screen instructions.
(2) Complete Calibrate Compass 1 and 2.
Once both steps are completed, the
calibration window will disappear.
19
5.5 Takeoff/Landing
Takeoff
Manual takeoff: To start/arm the motors, please be sure that the joystick setting is activated.
Simultaneously pull both joysticks diagonally down-out as shown in the right hand figure.
Slowly push the throttle stick up; the aircraft will ascend and takeoff.
Landing
Manual landing: Slowly push down the throttle stick until the copter has completed its
descent to the ground. Disarm the motors by simultaneously pulling both sticks diagonally
down-out. When the motors have completely stopped, release the joysticks.
Auto Takeoff: Press the Auto Takeoff button
(right hand figure). The aircraft will take off
and hover at a height of around 2 meters. Note
that the Auto Takeoff key will turn into an Auto
Land key after the aircraft begins to fly.
