background image

23

Frequently Asked Questions 

1. Cannot arm motors

1) Make sure that you have completed compass calibration
2) If you are flying indoors, please check the Settings menu to see if the aircraft can takeoff without 
GPS.

2.  Weak or nonexistent GPS signal/few or no GPS satellites

Make sure that the aircraft is not indoors or between buildings. Please take the aircraft outdoors to 
receive GPS satellites/signal.

3. The aircraft flies erratically in Altitude Hold mode

1) Check to see if the air pressure sensor reading (Altitude telemetry value) is abnormal when the 
aircraft is motionless on flat ground. It should read 0 and fluctuate very little.
2) Check to see if the throttle joystick channel is moving appropriately and properly centered. If not, 
please calibrate the transmitter sticks and adjust the channel with the corresponding trim button 
(located on the transmitter).

4. Waypoint Mode does not work

1) Check that the aircraft has 6 or more satellites
2) Check that all joystick channels on-screen are properly centered. 

5. Follow Me mode does not work 

1) Check that the aircraft is in GPS Hold mode (Follow Me will not work without it)
2) Check that the aircraft has 6 or more satellites (Follow Me will not work otherwise)
3) Make sure that the all joystick channels are properly centered and that the joysticks are not moved 
while Follow Me mode is engaged or being engaged. (the aircraft will automatically exit Follow Me 
mode if a non-throttle joystick is moved or not centered)

6. The aircraft does not return to the home point

When the aircraft takes off, be sure that the aircraft has received 6 or more satellites. 

7. The aircraft keeps on losing GPS satellites or GPS satellites drop to 0 erratically

Check to see whether there are sources of high-frequency signal interference around the aircraft (such 
as high-voltage lines, signal transmission towers, etc).

8. Aircraft/video feed is shaking/shaky

1) Check if the aircraft propellers are deformed or broken. Please replace them.
2) Check that all aircraft body screws are firmly in place.
3) Check whether any motor shafts are broken. Motors must be replaced if the shafts are broken.

9. Cannot take videos or pictures

1) Check to see that the SD card is installed in the aircraft prior to power on.
2) That the SD card is Class 10 or higher (UHS-1 suggested), less than 64GB of storage and 
formatted to FAT32. 

10. Cannot connect to the aircraft’s Wi-Fi

Restart the aircraft.

Summary of Contents for H216A X4 STAR PRO



























Reviews: