2 The HT009 Remote Control/Transmitter
1.4 Aircraft LED indications
The H216A has 4 LEDs; the fore/frontal LEDs are blue and the rear LEDs are red. The LED
status indications are defined as follows:
2.1 The HT009 Remote Control/Transmitter
The HT009 is a Bluetooth transmitter fully outfitted for use with the H216A aircraft and its various
functions. Experience real-time video transmission through the X-Hubsan app on a mobile device
equipped with a high definition screen.
08
Compass
Calibration
Calibrate Compass 1
Calibrate Compass 2
All 4 LEDs flash clockwise
LEDs flash in vertical pairs, alternately
Horizontal Calibration
Flight mode
Return to Home
Low power
All 4 LEDs flash simultaneously
All 4 LEDs are solidly lit
Headless mode
Fore LEDs slowly flash blue and rear LEDs are solid red.
Fore LEDs are solid blue and rear LEDs slowly flash red.
Fore/frontal blue LEDs stay solidly lit and the rear red LEDs flash rapidly
Function
Power on and start up
All 4 LEDs flash simultaneously
LED status indication
Flight control connection status
When the aircraft is not connected to a transmitter or has been disconnected
from a transmitter, the fore LEDs will flash blue. Upon connection with a
transmitter, the fore LEDs will turn solid.
Make sure that the propellers are installed in the correct positions (A to A, B to B). Otherwise,
the aircraft will not be able to fly normally.
Since the propeller blades are thin and somewhat sharp, it is recommended that users wear
gloves during installation to prevent accidental injury.
8 Photo
key
9 Video
key
Battery compartment
10 Camera head adjustment key
(Temporarily no function)
