8 Advanced performance setup
8.1 Reversing channel setup
If you would like to reverse any of the stick functions due to personal preference, then follow
the instructions below. Be aware that this will reverse the control commands.
Pull the throttle stick down to the lowest position and long press the ‘Enter’ button to
open the ‘Main Menu’ interface. Use the Up/Down keys to select ‘Set reverse’ and use
‘Enter’ button to switch between modes. Long press ‘Exit’ button to save and exit.
17
8.2 Sensitivity setup
If you would like to adjust the sensitivity of any stick functions, then follow the instructions
below.
Pull the throttle stick down to the lowest position and long press the ‘Enter’ button to
open the ‘Main Menu’ interface. Use the Up/Down keys to select ‘Set sensitive’ and use
‘Enter’ button to switch between ‘Expert mode’ and ‘Normal Mode’. Long press ‘Exit’
button to save and exit.
X-Hubsan H501A
The GPS Switch is position-hold function
switch.
In position 1 (up), the GPS functions are
active.
In position 2 (down), the GPS functions are
deactivated.
The Home Switch is used to the turn on/off
automatic return function.
Up (Position 1) activates the Home function.
Down (Position 2) deactivates the Home
function.
[Home]
[SB]
position 1 (upward) position 2 (downward)
Mode 2
Transmitter
X4
Remarks
Mode 2
Transmitter
X4
Remarks
[GPS]
[SA]
+
+
