12
2.5
Remote Control Antenna Angle
•
Adjust the angle of the remote control
antenna and try to face the flight direction
of the aircraft as much as possible;
•
Long-distance state, the distance between
the two antennas is properly tightened to
maintain the antenna directivity;
•
Closer Sate, the two antennas are properly
separated to maintain a wide receiving
range;
•
Do Not Form an occlusion or cross
between the antennas.
2.6 Transmitter Calibration
Enter: Push both sticks to the upper left corner and power on the transmitter
simultaneously, the transmitter tips "Beep"..., which indicates enter the Calibration
Mode; release the power button during calibration.
Exit: Rotate both sticks in circles to the utmost extent for three times, then release the
stick, long-press any button except the power button until the remote control stops
“Beep”...
，
which indicates the calibration ends, the remote control automatically exit
Calibration Mode.
3 Flight
3.1 Download The X
-
hubsan 2.0 App
Before flying, users must download the X-Hubsan 2.0 APP.
Download the APP for free by scanning the code as shown or
by download it via APP Store (IOS) Or Goggle Play (Android).
X-Hubsan 2.0
