User Manual for ADIBOT-A
27
/
50
Shenzhen UBTECH Robotics Corp Ltd.
2.
Turn on the robot. About more details, please refer to section 3.1.1.
4G network mode (A 4G card that can access Internet need to be prepared )
4G first
if the robot needs the 4G.
i
How to install the 4G network card:
1.
Open the back cover of the 4G network card, and insert the 4G Micro SIM network that can
access Internet into the PC, as shown in Figure 4.2.1b. You can first insert network card into
the OC. When the 4G network card in the USB port changes from red indicator to blue indicator
flashing every 2 seconds, you can confirm that the 4G network card can connect to Internet
provided that the PC can access the Internet normally.
2.
Use a screwdriver to unscrew the back cover of the robot debug interface, open the back cover,
and insert the 4G network card into the robot, as shown in Figure 4.2.1d.
Figure 4.2.1c
Figure 4.2.1b
