Main control box
Battery
Fas
tener A
Fas
tener B
C4
1
C6
5
BUTT
ON
4
By following the instructions below, you can assemble your first barrier gate.
BUILD YOUR ROBOT STEP-BY-STEP
3
C3
6
A.Installing the battery
B. Connecting the switch
1)
Place the battery in the slot of the main
control box.
2)
Push in fastener A and fastener B
respectively to lock the battery. Pull
out A and B to unlock the battery.
Locate the 2-pin switch cable and switch box, and
then connect them as show on the picture.
Attation
:
Each servohas 4
symbols,in order
to install part C3,
”O” symbol should
be facing down.
SER
VO
2
ERVO
Please Use:
Servo ID-01
Assemble barrier gate by following
the above steps. Locate the 3-pin
power supply cable in the parts box,
and connect the main control box
and servo as shown on the picture.
Flip the switch to the “ON” position and run the Jimu app on your mobile phone to start the beginner’s guide.
D. Connecting to your mobile phone
C. Assembling barrier gate
