2005 UCAN FASTENING PRODUCTS
7
PREPARAT ON:
I
1.
Open clutch lever to allow movement of racks.
2.
Retract the rack by pulling the rack handle away from the tool.
If using cartridge designed to be loaded into
dispenser before mixing tube is attached:
3.
Insert cartridge.
4.
Line up the cartridge and the cartridge nozzle
opening to assure correct positioning.
5.
Push rack handle forward, lining up piston with
the openings on the cartridge.
6.
Remove caps and plugs on the end of cartridge.
7.
Screw the static mix nozzle onto the cartridge.
If using cartridge designed for mixing tube to be
attached before loading into dispenser:
3.
Remove caps and plugs on the end of cartridge.
4.
Screw the static mix nozzle onto the cartridge.
5.
Insert cartridge.
6.
Line up the cartridge and the cartridge nozzle
opening to assure correct positioning.
7.
Push rack handle forward, lining up piston with
the openings on the cartridge.
OPERATION