background image

10

25

> Prolonged exposure to loud sounds may lead to permanent hearing damage.

> Do not attempt to place an outgoing call through the mobile phone while riding on the 

   motorcycle at any point of time. 

> Please do not use the              helmet communicator in any way that may distract you 

   or hinder your judgment while on the move. Never ever compromise your safety and the 

   safety of others.

> Charging and handling rechargeable battery products incorrectly may cause them to 

   overheat, catch fire or explode. To prevent this please follow the instructions below:

i) Never change the batteries yourself, always bring the device to an authorised dealer to 

   perform the replacement for you.

ii) When charging, use 

ONLY 

the charging cable provided or a replacement cable from the                 

                 dealer. Using similar, compatible or any other cables may lead to permanent 

    product damage and will void the product warranty.

> Never make any modifications to any part of the                helmet communicator in any 

   way as it may cause the system to malfunction causing hurt to you.

> Do not modify your helmet to use with this system - it is not necessary to do so.

Installation

Button Configurations Summary

Action

Button

Power on

Common Instruction Commands

Voice Calling

Power off

Volume down

Reset

Pick up incoming call

End call in progress

Reject incoming call

Activate Bluetooth Pairing

Hold Answer for 2 seconds

Hold Answer for 5 seconds

Press Down once

Press Answer, Up & Down simultaneously

Press Answer once

Hold Answer for 2 seconds

Hold Answer for 2 seconds

Voice dial

Last number redial

Hold Answer & Down for 2 seconds

Hold Answer & Up for 2 seconds

Music Streaming

Play

Stop

Fast forward track

Press Answer 2 times

Press Answer 1 time

Press Up button 2 times

Press Down button 2 times

Backtrack

Hold Up & Down for 2 seconds

Volume up

Press Up once

Pairing as helmet 1

(First Unit)
Pairing as helmet 2

(All subsequent units)

Intercomm

Connect intercom
Disconnect intercom

While unit is off, hold Answer and 

Down for 3 seconds
While unit is off, hold Answer and Up 

for 3 seconds
Hold Up for 2 seconds
Hold Down for 2 seconds

The               HBC220 SNOW helmet communication system contains:

A               HBC220 SNOW control unit

Side Mounted Helmet Strap 

Goggle Attachment Clip Strap 

Microphone Alignment Inserts 

AC charger and USB

 

charging cable 

User manual 

A pair of hi-fi stereo headset with embedded

microphones

Metal mounting bracket with double sided tape 

EN

EN

Summary of Contents for HBC220 SNOW



















Reviews: