This PoE spli er is supposed to work fine with non-PoE devices that need a
5V 2-2.5A input without any extra configura on, provided that you have
already deployed your PoE switches or injectors.
Step 1
: Connect the Micro USB male port of the spli er to the female port
on the target device.
Step 2
: Connect the RJ45 male port of the spli er to the female port on the
target device.
Step 3
: Use an Ethernet cable to connect the PoE spli er to a PoE switch or
PoE injector through the RJ45 female port.
3.INDICATOR LIGHT
An indicator light beside the RJ45 input port informs you of its status.
Indicator light
Status
ON
Powering and transferring data to your target device
BLINKS
Data transfer established without powering your target device
OFF
Not powering or transferring data to your target device
4.CONTACT US
You are always welcome to throw us ques ons, feedback, and advice.
UCTRONICS is an online wholesale company that aims at delivering the best
electronic component modules and open source hardware to every customer.
If you encounter any problem while using our product, please let us know.
Our professional technical team will help you solve it. Please do not hesitate
to contact us if you need any technical support on your UCTRONICS products,
and you are always welcome to send us any feedback or advice.
Website:
h p://www.uctronics.com
Email:
support@uctronics.com
