3.5”
Raspberry Pi Touch
Screen Display LCD
Panel, SPI Interface
(High
-
Speed Version)
Model: U6111
SPECIFICATION
Display
3.5”
(Diagonal)
Native Resolution
480×320 pixels
Video Input Support
480×320 ~ 1920×1080(scaled)
Video Interface
SPI 125MHz
Dual Display Support
Yes, up to triple on Pi 4
Power Input
Raspberry Pi GPIO power pins
Dimensions
85.6mm×55.98mm
Touch Screen Support
Raspbian, Ubuntu, Kali,
RetroPie
Raspberry Pi Support
Support all standard Raspberry Pi
Display Refresh Rate
60fps (MAX)
Hotplug Support
Yes
Backlight Control
On
-
board backlight switch
Power consumption
5V/150mA
Working temperature
-
10~55 C
Weight
50g
INTRODUCTION
UCTRONICS U6111 is a
3.5”
TFT LCD display with SPI
interface and touchscreen support. It works with all
standard Raspberry Pi models and supports operating
systems like Raspbian, Ubuntu, Kali and RetroPie. Win-
dows 10 IoT is NOT supported.
PACKING LIST
For U6111
●
UCTRONICS
3.5”
SPI Pi screen
●
This instruction Manual
VARIATIONS
●
U6111: Display
●
U611101: Display with case
For U61101
●
UCTRONICS
3.5”
SPI Pi screen
●
Acrylic case set
●
This instruction Manual
HARDWARE INSTALLATION
Figure 1
Dimension and Pinout
Figure 2
Align pins and connect to Pi
