19
www.udirc.com
Click on this icon to take photo.
Photo
Click on this icon and it turns red, which indicates that the drone enter Heading
Hold Mode. Click again to exit from Heading Hold Mode. The icon turns white.
Heading Hold Mode
Click on this icon to record video. The recording time will show at the bottom of
the screen. Click on this icon again to finish recording.
Video
Click on this icon and the icon turns red, the drone will fly down slowly and land
on the ground. All propellers also will stop running.
Click on this icon and it turns red shortly. The drone will fly up automatically and
stay flying at an altitude of 1.2 meters.
One Button Take Off
One Button Landing
H:0.1m
100%
It indicates the drone’s altitude position(As per calibration level)
When the drone battery capacity left around 15%, the phone will vibrate to alarm
that the battery is going to run out and you need to fly back and replace the battery.
Altitude hold icon
Drone battery status icon
Click on this icon to view or delete the aerial video and photo. Click on the arrow
to exit.
Media
By default, the drone is in Low Speed Mode “L”. Click on “H” to enter High
Speed Mode.
High / Low Speed Mode
Calibration Instruction
If the drone becomes imbalance after crashing during the flight, and can not be
adjusted by trimmer button and cause difficult operation, please calibrate the drone.
2. Do not push the Left Ball before successful calibration. Move the Right Ball as
the picture shown on the right. The drone body lights flash 3 times, which
indicates that the drone is calibrating. When the drone body lights get solid,
which indicates successful calibration and the drone is ready to be controlled.
1. Please refer to the Frequency Pairing between Mobile Phone and Drone WiFi to
calibrate the drone.
Summary of Contents for Discovery2
Page 1: ...Operations Guide U818A Plus W ...
Page 28: ......
