LED Lights
LED Lights
1.7*6PB Screw
1. Charge the Battery
1. Install the blade guards in the end of the drone arms and fix them by tighten the
attached screws.
2. Remove the blade guards to obtain additional motivation improvement and more
flying time.
BLADE GUARD INSTALLATION
CHARGING LI-PO BATTERY
4
Flip Control Button
Light Control Button
2. Transmitter
Left/Right Rudder Trim
Power Indicator Light
Throttle/Left/
Right Rudder Stick
Camera Button
Video Button
LCD Screen
Forward/Backward Trim
Left/Right Trim
Forward/Backward/
Left/Right Stick
One Button Flip
High/Low Speed Mode
PICTURE FOR FOOT STOOL INSTALLATION
3
Insert the pillar of the foot stool to the fuselage hold correctly in accordance with the
picture.
Note: The foot stool must closely fitting with the fuselage, or the foot stool may not
stand firm on the ground, which may have an effect on the flight stability.
