background image

Push up the Throttle Rudder Stick and 
the drone will fly up as well.Push down 
the Throttle Rudder Stick and the drone 
will fly drow as well. 

1. Up and Down Flying Control

Push the Left Rudder Stick to left or to 
right, the drone will rotate to 
corresponding direction.

2.Left/Right Rotation Flying Control

FLYING CONTROL

7

3. Left/Right Flying Control

Push the Right Stick to left or to right, 
the drone will fly to corresponding 
direction. 

Push the Right Stick to forward or 
backward, the drone will fly to 
corresponding direction. 

4. Forward and Backward Flying Control

Adjust the Trim to right till stable if the 
drone rotates to left automatically, and 
adjust to left if the drone rotates to right. 

5.Left/Right Rudder Trim

Adjust the Trim to right till stable if the 
drone drifts to left, or adjust the Trim to 
left if the drone drifts to right.

6. Left/Right Flying 

8

Adjust the Trim to backward till stable 
if the drone drifts to forward automatically,
and adjust to forward if the drone drifts 
to backward.

7. Forward/Backward Flying

6. Keep the throttle stick on the lowest position and push the right stick to bottom-right
    (see the picture). The drone LED flashes fast, which indicates that the drone is calibrating. 
    The LED keeps bright and the calibration finished

.

Turn on the power switch 

on the bottom.

OFF    ON

Summary of Contents for FALCON U842







Reviews: