![background image](http://html.mh-extra.com/html/udir-c/timy-u846/timy-u846_manual_834260006.webp)
U846-01
Top cover
U846-02
Lower cover
U846-03
Blades
U846-04
Rubber Feet
U846-05
A motor
U846-06
Li-Po battery
U846-07
Circuit board
U846-08
B motor
U846-10
UA15 Controller
U846-11
USB data cable
U846-09
UA14 Controller
11
12
In Headless mode, face the quadcopter and the Front will always be
away from you. It does not matter where the blue lights are – the front,
left, rear, and right will match your front, left, rear, and right.
When connecting a new or replacement motor, match the number of the
motor to the corresponding number written on the circuit board, 1 to 6.
For example, install motor #1 in the upper left of the quadcopter and
connect the wires from motor #1 to the connector labeled “M1” on the
circuit board.
Below are spare parts for your selection which you may obtain from your
local distributors.
Hold the left stick down for
3 seconds to enter Headless
mode.
Installing a Motor
SPARE PARTS
USB Power
Power Switch
Blue lights
Front
Right
Left
Front
Rear
Right
Left
Front
Rear
Right
Left
Front
Rear
Right
Left
Blue lights
Blue lights
Front
Rear
Right
Left
Blue lights
Blue lights
3 seconds
1
2
3
4
5
6
Motor #1 is in the upper left.
Motor #2 is in the upper right.
Motor #3 is on the right.
Motor #4 is on the lower right.
Motor #5 is on the lower left.
Motor #6 is on the left.