background image

2

3

(4) We undertakes no liability for those accidents caused by improper
     operation, use and control of the drone after sale of the product.
(5) We has entrusted the distributor to provide technology support and
     after-sale service. If you have any questions about use, operation, 
     repair etc., please contact your local distributor.

(2)  Keep away from humid environment

The drone inside is consisted of precise electronic components.
 Humidity or water vapor may damage electronic components and
cause accident.

2. Safety Precautions:

Keep away from crowd when flying because a flying RC drone is very
dangerous. Improper assembly, broken main frame, defective electronic
equipment or unskilled operation all may cause unpredictable accidents
such as drone damage or human injury. Please pay special attention to
safety operation and have good knowledge of accident responsibility
that the user may cause.

(1)  Keep away from obstacles and crowd

The speed and status of a flying RC drone is uncertain and it may
cause potential danger. So the user must keep away from crowd, 
tall building, power lines etc. when operating a flying RC drone. Do
not fly a RC drone in rainy, storm, thunder and lighting weather for
the safety of user, around people and their property. 

(2) This drone is suitable for experienced RC drone user aged 14 years
      or above.
(3) The flying field must be legally approved by your local government.

Notice:

1. Important Statement:

(1) This product is not a ordinary toy but a piece of complicated
     equipment which is integrated with professional knowledge by
     mechanic, electronic, air mechanics, high-frequency emission etc., 
     so it should be installed and adjusted correctly to avoid accidents. 
     The user must always operate in a safe manner. We undertakes no
     liability for human injury or property damage caused by improper
     operation as we could not control the procedure of installation, use
     and operation of this drone. 

(3)  Safe operation

Please operate the RC drone in accordance with your physical
status and flying skill. Fatigue, listlessness and improper operation
may increase the rate of accident.

(4)  Keep away from rotating parts

Rotating Parts can cause serious injury and damage. Keep face and
body away from rotating motors.

(5)  Keep away from heat

(6) Please do not touch the hot motor to avoid being burnt.

The RC drone is made of metal, fiber, plastic, electronic
components etc. Keep away from heat and sunshine to avoid
distortion and damage.

(5) Make sure the connection is solid between battery and motor etc. 
      The ongoing vibration may cause bad connection of power terminal
      make the drone out of control.
(6) Improper operation may cause drone crash, which may arouse motor
     defective and noise, and then effect the flying status or even stop flying. 
     Please go to the local distributor to buy new parts for replacement so
     that the drone will return to its best status.
(7) The drone should be controlled within max control distance. Do not
      fly the drone near tall building, high voltage cable or other place with
      signal interference. Or may cause signal interruption and the drone 
      will out of control, which may result of accident.

(4) Please strictly obey the order of turn on and turn off before operation.
     Turn on the transmitter power first and then turn on the drone power
     before flying; turn off the drone power first and then turn off the 
     transmitter power when finish flying. Improper turn on and turn off
     order may cause the drone out of control and threaten people’s safety. 
     Please cultivate a correct habit of turn on and turn off.

(1) Flying field must spacious enough and we suggest at least
     8M (length)*8M (width)*5M (height).
(2)  Make sure the drone battery and transmitter battery are fully charged.
(3)  Make sure the Left Stick of the transmitter in the middle position.

3. Check List Before Flight

Summary of Contents for U842-2













Reviews: