4
5
Landing Gear Installation Diagram
Aim at the hole in the drone, and press the landing gear’s pillar down to
the hole. Then lock the landing gear by the attached 2.3*18 screws
(long screws) as the diagram shown.
Note: Please install the landing gear perfectly. If the landing gear can not
stand firm on the ground, it will effect the flight stability.
ON
LED Lights
LED Lights
OF
F
1. Drone
Name of Parts
Propeller B
Propeller A
Propeller A
Propeller B
LED Lights
Propeller Guard
Front
Rear
Right
Left
2. Transmitter
Rotate Up the
Camera
Rotate Down the
Camera
Rigiht Stick
(Forward / Backward /
Left / Right Flying Stick /
Altitude Hold Mode)
Left / Right Rotation
Trimmer
Forward / Backward /
Left / Right Flying
Trimmer
SD Card Slot
Power Switch and Indicator Light
2.3*18 Screws
2.3*18 Screws
Left Stick
(Throttle / Rotation
Stick)
High / Medium /
Low Speed Mode
Heading Hold Mode
Battery Box
Main Specification
Drone Size
Drone Weight
485*485*150mm
380g
Max Flying Distance/Radius
Max Image Transmission
Distance/Radius
100m
60m
Propeller Diameter
Flying Time
190mm
6~7min
Camera Resolution
1280x720P
LCD Resolution
Transmitter Battery
Charging Time for
TransmitterBattery
480x272P
3.7V 450mAh
About 70 mins
Drone Battery
3.7Vx2 1000mAh
Charging Time for
Drone Battery
About 150 mins
