11
2)
1>
2>
1)
Operational guidance
Frequency matching
Place the model on level ground
Consistent direction
Do not touch the
throttle trigger when
turning on thepower
of the transmitter.
Turn on the power of
the transmitter, and
the red indicator light
will flash quickly.
After the car power is turned on, the transmitter and the car will carry out automatic frequency matching. When the indicator light of the
transmitter and the car lights are always on, the frequency matching is successful. In the process of frequency matching, the car lights
will flash rapidly. At this time, the gyroscope is being calibrated automatically. Please place the car on the level ground to complete this
operation. After calibration, the car lights return to normal.
Manipulation method
Go forward
Go backward
Throttle trigger
Throttle trigger
Press for 2 second to turn on the power. The lights
flash and enter the frequency matching state. Press for
2 second to turn off the power.
