udir/c UDI021 Operation Manual Download

Page: 3 / 12

Battery Charge

Connect the charging case to the charging input port of the boat battery and then connect the USB

output ports. The green indicator light flashes when charging and the green indicator light will keep

bright fully charged. During the charging, battery should not be placed in the hull when charging

and must be cooled before charging.

USB adapter (Not Include)

Battery power is insufficient in the original plant. It must be charged saturated before it can be used.

②

①

Battery

input port

Charger for Li battery case

power

charging

Boat battery

Warning: Must be supervised while charging

Please use the included USB charging cable and make sure it is properly connected.

Boat battery installation method

1) Twist to left or right to open the outer cover lock.

2) Open up the cabin cover.

3) According to the mark on the surface of the inner cover, unlock the lock and take out the inner

cover upward.

Cabin Inner

Cover

Summary of Contents for UDI021













Search results

Summary of Contents for UDI021

Reviews:

Related manuals for UDI021

Brands by name

Popular brands

udir/c UDI021, Operation Manual

Search results

Summary of Contents for UDI021

Reviews:

Related manuals for UDI021

Brands by name

Popular brands