background image

Low Battery Alarm

Out of Range Alarm

The motor lowers the temperature by flowing water. During the voyage, water flows through the 

heat pipe around the motor, which has a cooling effect on the motor.

Water cooling system

Boat:

 When the boat in low battery, the transmitter will beep "di.di.di. ..." constantly to remind the 

           user to remote back the boat as soon as possible. And the boat speed will slow down to half 

           and the capsize reset function will turn off automatically when the boat in low battery.

Transmitter:

 When the transmitter in low battery, the transmitter will beep "di.di.di. ..." to remind 

                        the user to remote back the boat to replace the batteries as soon as possible.

When the boat is running out of the max remote control distance, the transmitter will beep

"didi...didi..." to alarm the user to remote back the boat immediately.

Safety Precautions

1) Turn on the transmitter power first and then turn on the boat power before playing; Turn off the 

    boat power first and then turn off the transmitter power when finish playing.

2) Make sure the connection is solid between battery and motor etc. The ongoing vibration may 

    cause bad connection of power terminal.

3) Improper operation may cause impact to the boat and damage the hull or propeller.

4) It is forbidden to sail in the water where people are useful and sail away from salt water and 

    sundry water.

5) The battery must be take out after playing to keep the cabin dry and clean.

08

Summary of Contents for UDI021













Reviews: