Udirc DISCOVERY C, Operation Manual

16

Low Battery Alarm

When the transmitter in low battery, the transmitter will beep “di-di” to remind the

user to land the drone to replace the battery as soon as possible. Or the drone

may be out of control.

When the drone in low battery, the transmitter will beep” di.di...” constantly to 

remind the user to land the drone as soon as possible. The flip function will turn 

off automatically when the drone in low battery.

Out of  Range Alarm

When the drone is going to fly out of the max remote control distance, the 

transmitter will beep “didi...didi...didi...” to alarm the user to fly back the drone 

immediately. Or the drone may be out of control and fly away.

Motors Stuck Protection

1. When the propellers get stuck, then the drone LED will flash quickly and 

    activate stuck protection function and the motors stop running.
2. Pull down the left stick to the lowest position, the drone LED will get a solid 

    light and stuck protection will be released and the drone can fly again.

Tip: Please play the video or photo after copying all aerial photography data to 

       computer and make sure the play software can support AVI format.

Basic parameter for aerial camera: Video DPI 1280*720P 

                                                      Image Size 1280*720P

To take photo and record video

1. Insert the TF card to the slot in 

    accordance with Picture 18.
2. When take photo and record video, 

    photos and video files will be saved

    in the TF card.

Tip: Click on the video icon to save a video when 
       ending recording, or the video cannot be saved. 

3. Power off the drone first when finish aerial photography. Take out TF card and 

    insert the card to a card reader. Connect the card reader with computer USB 

    port. After a while, view the aerial photography data from “my computer”-

    ”mobile disk”.

www.udirc.com

Picture 18