5
Additional Instruction before Flying:
1. The white light is front (head).
2. Power on the drone and check the rotating blades. The left front/right rear
blades rotate towards clockwise direction while the right front/left rear blades
rotate towards counterclockwise direction.
Charging Method of Li-Po Battery
1. Connect the USB wire with one of the USB port listed in the below picture first,
and then connect the drone battery with the USB wire. (prior to choose 2A, 5V
charger)
2. After connecting the USB wire with the USB port, the green USB indicator light
keeps bright. After connecting the USB wire with the drone battery, the red USB
indicator light keeps bright. About 50 minutes later, the light turns to green and
keeps bright when fully charged.
* Li-Po battery is included in spare parts and please pay attention on the safe notice.
* Never put the battery on high temperature place, such as fire or heating device to
avoid damage or explode.
* Never use the battery to crash or hit hard surface.
* Never put the battery in water. Keep it in dry place.
* Never detach the battery.
* Never leave the battery without supervision when charging.
Drone Battery
3. Insert the lens hood to the slot and make sure the lowe edge of the lens hood
next to the mobile phone closely as Picture 6.
Picture 6
Li-Po Battery Disposal & Recycling
Wasted Li-Po batteries must not be placed with household trash.
Please contact local environmental or waste agency or the
supplier of your model or your nearest Li-Po battery recycling center.
