1>
详见附页《遥控器操作指南》
先开启遥控器电源,再开启车辆电源,遥控器和车辆会自动对频,当遥控器指示灯和
车灯常亮时,则对频成功。在对频过程中车灯会快速闪烁,此时陀螺仪正在进行自动
校准,请务必将车辆放置于水平地面完成此操作。校准完毕后车灯恢复正常状态。
拔动开关开启电源。车灯闪烁。进入对频状态。
确认油门扳机处于中位。开启遥控器电源时禁止触碰油门扳机。
After turn on the transmitter power, turn on the car power, the transmitter and the car will carry out
automatic frequency matching. When the indicator light of the transmitter and the car lights are
always on, the frequency matching is successful. In the process of frequency matching, the car lights
will flash rapidly. At this time, the gyroscope is being calibrated automatically. Please place the car on
the level ground to complete this operation. After calibration, the car lights return to normal.
Do not touch the throttle trigger when turning on thepower of the transmitter.
Please read the attached page "Remote Control Operation Guide" for details.
Turn on the power by toggle switch. The lights are flashing to enter the frequency state.
Horizontal ground
水平地面
操作指引
Operational guidance
对频
Frequency matching
- 16 -
Summary of Contents for UD1003
