Palo System
Installation Instructions
General Note:
It is the responsibility of the purchaser and/or installer to verify that the mounting surface is solid and capable of supporting the intended
weight of display. It is recommended to consult with a professional and determine the appropriate fastener/anchor needed for the mounting surface. UDIZINE
is solely responsible for the quality of its products and not accountable for faulty installation and ill use of its products beyond recommended limitations.
IPSK002
Hang Rail Kit -
Ø 2.5 cm (1”)
Page 1 of 3
Wall to Floor - Hang Rail
G
H
H
H
H2
H1
PSK-S01 - 60cm (24”)
PSK-S02 - 90cm (36”)
PS110AN - 60cm (24”)
PS111AN - 90cm (36”)
Wall Kit Fixtures
Toggle Bolts
Molly Bolts
Level
4.8mm (3/16”)
Phillips Screw Driver
Hand Saw
Metric
#
2.5 &
#
3
Please Note:
For mounting on sheet rock/drywall,
we recommend using 4.8mm (3/16”)
Molly bolts or Toggle bolts.
FYI: Tools and mounting hardware
are not provided
Recommended Tools:
PS15AN
A
E
C
B
PS13AN
PSK-F01 - 20cm (8”)
PSK-F02 - 30cm (12”)
PS11AN
F
PS12AN
D
PS14AN
Max Height:
244cm (96”)
Can be cut to size
Max Weight Load:
Per Setting : 240kg (530lbs)
Per Bar:
PSK-S02 -76cm (36”)
PSK-S01 - 61cm (24”)
AS12AN - 20cm (8”)
AS13AN - 30cm (12”)
PS19AN
PSK-S01 - 60cm (24”)
PSK-S02 - 90cm (36”)
Dispersed Load
37kg (81lbs)
25kg (55lbs)
Concentrated Load
45kg (99lbs)
30kg (66lbs)
PSK-F01
PSK-F02
20cm (8”)
30cm (12”)
