UDO Super 6 — Owner’s Manual
49
Duration
Amplitude
ATTACK
DECAY
SUSTAIN
RELEASE
ATTACK HOLD
however long you
press down a key
as soon as you
release all keys
DECAY HOLD
ENV 1 (Envelope 1)
Envelope 1 setting and a diagram of the resulting envelope shape.
A(TTACK) H(OLD):
This fader controls the amount of time it takes for the
attack stage to start after you pressed a key. The attack hold stage can be
as short as 0 seconds or as long as 10 seconds. At its minimum setting
this parameter will have no impact, i.e. the envelope will then respond as
if it only featured four or five stages (attack, decay, sustain, and release or
attack, decay hold, decay, sustain, and release).
On the desktop model you can access this parameter when you enable
shift mode. Then the
ATTACK
fader allows you to adjust the duration of
the attack hold stage.
A(TTACK):
This fader determines the duration of the envelope’s attack
stage. The higher the setting, the slower the attack time and the longer
it will take for the envelope to affect its destination, for example the filter
cutoff frequency. The attack stage can be as short as 0.5 milliseconds or
as long as 10 seconds.
Summary of Contents for SUPER 6
Page 142: ......
