UDO Super 6 — Owner’s Manual
88
Global Fine Tune
To enter the global fine tune mode, press the SHIFT
button. You will then be
able to adjust the fine tuning by means of the MOD AMOUNT
rotary control.
If you turn the
MOD AMOUNT
control clockwise, the frequency will be
increased. If you turn the rotary control counter-clockwise, the frequency
will be decreased. You can adjust the fine tuning over a range from -1
semitone or -100 cents to +1 semitone or +100 cents.
As soon as you touch or slightly move the
MOD AMOUNT
control, the
LEDs of patch and bank select buttons
1
-
8
and
A
-
H
will indicate the
current fine tuning setting.
If you turn the
MOD AMOUNT
control clockwise the number of lit LEDs
will shrink towards the right when the fine tune amount is negative and
grow towards the right when the modulation amount is positive. The effect
is reversed when turning the
MOD AMOUNT
control counter-clockwise.
The printed line at the very top of the patch and bank select button section
serves as a legend for what amount of fine tuning is being indicated by the
lit patch select button LEDs.
When you adjust the global fine tuning, the middle octave LED will
continue flashing even after you exit shift mode to indicate that the
default global tuning has been changed.
In the first example the lit LEDs of the patch and bank select buttons
(coloured black here) indicate a global fine tune at the default setting
of 440 Hz:
In the second example the lit LEDs of the patch and bank select buttons
(coloured black here) indicate a global fine tune setting of +1 semitone or
+100 cents:
Summary of Contents for SUPER 6
Page 142: ......