50
Click to set
Press Enter to store the information and Spin and click to exit.
If
Parameter Info
has been selected in the
Storage Display
function, the identical
data and data entry as described above will be shown. Additional information such as
date, time, module used and a command for data storage will be shown in the MORE
function.
FIELD ENTRY LIST FOR ELECTRICAL: TEST RESULTS: COR/BAD/TRK/ARC/PD/
NE/MEC
VOLTAGE: 120V-750 KV
COMPONENT: INS/SGR/TFR/BSR/TER/DCT/NE
LOCATION: Loc0 to Loc9
STREAM
To view Steam Info, click the Sensitivity Control Dial to move the cursor to the bottom
of the Display Panel until
“Press ENTER For” is blinking.
Spin to Steam Info and press
Enter.
To enter a test condition:
Spin to Test: the condition default is OK and it will blink slowly. If it is necessary to
change:
Click with the Sensitivity Control Dial and the condition (OK) will blink rapidly.
Spin to select a condition indication. The choices are; OK,
LEK/BLW/NIS/PLG/SIZ/OTH.
To Set, Click the Sensitivity Control Dial (the condition will blink slowly).
Spin to Temperature In.
Click on the Temperature setting (it will blink rapidly) For example, if you are looking
to enter a reading of 250; Spin to the left to select the value of “200” and to the Right
to select the value of 50).
Click to set.
Spin to Temperature Out.