54 / 68
In the
BT Setup
menu, you can configure the following settings. Use
UP/DOWN
and
ENTER
to change the settings.
•
Set the maximum download rate.
•
Set the maximum upload rate.
•
Set the idle hours to start the next download automatically.
•
Set the seeding hours.
•
Set to delete the finished torrent files automatically, if you wish.
•
Set the maximum number of simultaneous download tasks.
8.4 Built-in Web Server
A web server named “Neighbor Web” has been integrated into the Player. To access it, please
follow these steps:
1. Connect the Player to your home network (LAN or WLAN).
2. Find the IP address of the Player in the
SETUP
->
NETWORK
menu.
3. Type the IP address (e.g., 192.168.3.15) in the Address Bar of Internet Explorer on your
PC. You will see the Neighbor Web page.
4. Depending on how the
Login Control
parameter is set under the
Setup
->
Network
menu,
you may or may not have to enter your username and password to login. If Login Control is
set to “On”, the default parameter is as follows:
•
Username : admin
•
password : 123
5. You can then change the password under Account Management on the Neighbor Web.
6. If the Login Control is set to “Off”, then no login is required and you will be taken directly
into the Neighbor Web.
7. From the Neighbor Web, you can set up the BitTorrent download.
