Continuity
• Buzzer sounds at less than 40Ω.
WARNING
• Do not measure resistance on a live circuit.
Features:
HOLD
Continuity
Audible threshold
Response time
Overload Protection
Approx : < 40Ω
50ms
600V
CAT III
600V
VΩ
DL200
600V CAT III 200A
HOLD
Single
Conductor
Only
AC Amps: <200A
CAT III
600V
VΩ
DL200
600V CAT III 200A
• Center wire in conductor alignment marks for best accuracy.
• Opposing currents cancel
(use line-splitter when necessary).
WARNING
• Keep hands below guard when measuring high current levels.
• Do not attempt to measure more than 200A AC.
Features:
HOLD
AC Amps – Jaw Input
Ranges
Resolution
Accuracy
Overload Protection
1A to 200A
0.1A
±(2.0% + 5 dgts)
600V
Frequency Range: sine wave: 45Hz to 400Hz
Maximum Displayed value: AC220A
Minimum Displayed value: AC 500mA
CAT III
600V
VΩ
DL200
600V CAT III 200A
HOLD
Test Lead Notes
CATIV 600V Measurement Locations
• The DL200 is CATIII rated to IEC 61010-1 3rd edition standards. Do not
attempt to measure in locations that requires a CATIV rated meter. Remove
the CATIV test lead caps and use the CATIII 1000V test lead measurement
locations.
CATIII 1000V Measurement Locations
• CATIV shields must be removed for CATII and CATIII locations.
4mm
18mm
4mm
CATIV
600V
CATIV
600V
CATIII
1000V
18mm
• Default =
• Press x1 =
• Press x2 =
