background image

Limited Warranty

The DL259 is warranted to be free from defects in materials and workmanship for a period
of three years from the date of purchase. If within the warra n ty period your instrument
should become inoperative from such defects, the unit will be repaired or replaced at UE i ’ s
option. This warra n ty covers normal use and does not cover damage which occurs in 
shipment or failure which results from alteration, tampering, accident, misuse, abuse, 
neglect or improper maintenance. Batteries and consequential damage resulting from failed
batteries are not covered by warra n ty. 

Any implied warranties, including but not limited to implied warranties of merchantability
and fitness for a particular purpose, are limited to the express warranty. UEi shall not 
be liable for loss of use of the instrument or other incidental or consequential damages,
expenses, or economic loss, or for any claim or claims for such damage, expenses or
economic loss. A purchase receipt or other proof of original purchase date will be required
before warra n ty repairs will be rendered. Instruments out of warra n ty will be repaired
(when repairable) for a service charge. Return the unit postage paid and insured to:

1-800-547-5740 • FAX: (503) 643-6322

Service: (800) 308-7709

www.ueitest.com • Email: info@ueitest.com

This warranty gives you specific legal rights. You may also have other rights which vary from
state to state.

DL259

True RMS Clamp-On Multimeter

Copyright © 2003 UEi      

DL259-MAN  7/03

Summary of Contents for VEI DL259







Reviews: