(Shenzhen) Technology Co., Ltd. disclaims all
liability.
7. Users need to check the collision protection
and water-proof measures before any
transportation.
When the robot cooperates with other machinery, a
comprehensive safety assessment of the entire
collaboration system should be performed. It is
recommended that any equipment that may cause
mechanical damage to robot be placed outside the
working range during application planning.
Operator Safety
In the operation of the robotic arm system, we must ensure the safety of
the operators first, with the general precautions listed in the table
below. Please take appropriate measures to ensure the safety of operators.
1. Each operator who uses the robotic arm system
should read the product user manual carefully.
Users should fully understand the standardized
operating procedures with the robotic arm, and
the solution to the robotic arm running error.
2. When the device is running, even if the robotic
arm seems to stop, the robotic arm may be
waiting for the signal and in the upcoming
action status. Even in such a state, it should
be considered as the robotic arm is in action.
3. A line should be drawn to mark the range of
motion of the robotic arm to let the operator
acknowledge the robotic arm, including its end
tools (such as gripper and suction cup, etc)
operating range.
4. Check
the
robotic
arm
regularly
to
prevent
loosening
of
the
bolts
that
may
cause
undesirable consequences.
5. Be careful when the robotic arm is running too
