UFESA LC5000, Instruction Manual

WARNING!

Risk of property damage

●

Do not disconnect the plug from the socket pulling 

the cord.

●

The appliance may only be plugged to an electrical 

socket (alternating current only) with a voltage in 

conformity with the one given on the rating plate of 

the appliance.

●

Do not overload the appliance with too much product 

or by pushing it too hard (with the pusher).

●

Switch off the appliance immediately after noticing 

strong vibrations or reduced speed. Clean the sieve 

and its housing.

●

Stop the operation and unplug the appliance if the 

product is blocked in the feeding tube or on the 

grinding disc. Remove the cause of the blockage.

●

Immediately stop operation and unplug the 

appliance if any liquid has entered into the motor 

of the juice extractor. Return the juice extractor to 

a service point for inspection.

●

Do not expose the juice extractor to temperatures 

over 60°C.

●

Do not leave a plugged in appliance unattended.

●

Do not immerse the motor into water. Do not wash 

it under running water.

●

Do not use abrasive detergents such as emulsions, 

cream cleaners, polishes, etc. to clean the housing. 

They may remove the graphic information symbols 

such as: scales, marks, warning signs etc.

●

Place the motor body near a socket on a flat, stable 

surface so that the vent holes of the appliance are 

not covered.

HINT

Information on the product 

and hints on its use

●

The appliance is intended for domestic use. In case 

it is used for food business purposes, the warranty 

conditions shall change.

●

Unplug the appliance after operation.

●

Use a soft brush to wash the metal parts especially 

the sieve with the sharp grinding disc.

Technical data 

The technical parameters are quoted on the nameplate 

of the product.

Admissible time of non-stop operation 

15 minutes

An interval between repeated operation 

30 minutes

Noise generated by the appliance (L

WA

) 

80 dB/A

The juice extractor is built in II class insulation 

.

The juice extractor meets applicable norms 

requirements.

The appliance meets the requirements of the directives:

–

Low voltage electrical device (LVD) – 2006/95/EC.

–

Electromagnetic compatibility (EMC) – 2004/108/EC.

The product is marked with CE symbol on the nameplate.

Description 

1

 Motor  base 

2

 On/Off  button 

3

 Clamps 

4

 Clutch 

5

 Juice  bowl 

6

 Strainer  basket 

7

 Cover 

8

 Food  pusher

Before operation 

Before the first use, dismantle the juice 

extractor, wash and dry the parts that 

have contact with the processed product.

1

 Place the motor on a hard, clean and dry surface 

near the electrical outlet.

2

 Grasp the clamps on both sides of the appliance 

and pull them away from the motor housing.

3

 Lift the clamps, release the lid and lower the clamps.

4

 Take out the food pusher. Remove the lid and the 

bowl together with the sieve.

A

B

shall not play with the appliance. 

Cleaning and user maintenance 

shall not be made by children 

without supervision.

●

Do not wash metal parts in the dishwasher. 

Aggressive detergents used in the dishwasher 

cause these parts to darken. Wash them manually 

using traditional dishwashing liquids.

●

Before the first use, wash thoroughly all elements 

of the equipment.