UFESA LC5000, Instruction Manual

●

Over time plastic parts may become discoloured. 

This is not a product defect.

●

After washing, dry all elements thoroughly.

●

Assemble the unit as described in section 

C

.

What to do when: 

The juice extractor does not work:

●

Return the juice extractor to a service facility.

The juice is extracted in a poor manner, the juice 

extractor is subject to vibrations:

●

Switch the appliance off, clean the strainer from any 

residue, empty the waste receptacle,

●

Replace the strainer in case of mechanical damage.

How to extract juice from fruits 

and vegetables: 

●

Remove stones from fruits as they may damage the 

juice extractor.

●

Carefully wash the fruits and vegetables to be 

processed.

●

Wash berries directly before processing, as they 

quickly lose freshness.

●

Extracting juice from plums, blueberries, raspberries 

and soft pears is troublesome. The pulp of these fruits 

blocks the openings of the sieve. You can process these 

fruits by mixing them in small quantities with other fruits 

and vegetables. In such a case the sieve has to be 

cleaned more often.

●

While extracting juice from grapes, insert whole 

fruits into the feeding tube, without the stem.

●

Cut bigger fruits and vegetables into pieces before 

processing.

●

Insert the fruits and vegetables into the feeding tube 

after switching on the appliance.

●

The nutritional value of the raw juices is similar to 

the nutritional value of the fruits and vegetables, except 

that the juice does not contain fiber which is removed 

during juice processing.

Juice obtained from some fruits and 

vegetables has a tendency to concentrate. 

This is due to the characteristics of the 

used products and it is not influenced by the 

juice extractor. The obtained juice might not be 

clear, but this kind of juice has the most 

nutritional value.

Juice extractor assembly 

1

 Insert the bowl on the motor so that the groove fits 

into the slit of the motor housing.

2

 Insert the sieve on the driver, press until stop and 

check if it is correctly inserted and it turns easily.

3

 Insert the lid on the bowl.

4

 Lift both clamps and insert the fastenings in the 

openings of the lid.

5

 Press the clamps to the housing (you will hear 

a characteristic click).

6

 Place an appropriate utensil under the groove 

discharge.

Start up and operating  

the juice extractor 

●

Check if the switch is in the “0” position.

●

Unwind a sufficient length of the cord. The 

remaining cord can be stored in the housing. Put the 

remaining cord in the housing through the opening 

situated at the side of the juicer.

1

 Plug in the appliance and switch it on.

2

 Place the product to be processed into the feeding 

tube and gently press with the pusher.

After operation  

(after extracting the juice) 

1

 Switch off the appliance.

2

 Unplug the appliance.

●

Dismantle the parts – as in the case of the initial wash.

Maintenance 

●

After you have finished clean the juice extractor 

thoroughly to avoid the residue drying out.

●

The motor base housing should be cleaned with 

a wet cloth and a small addition of a washing-up liquid.

●

The other components (juice bowl, cover and food 

pusher) should be cleaned after finishing the work in 

a lukewarm water with an addition of a washing-up 

liquid. Rinse them and dry. These component may be 

also cleaned in a dishwasher at max. 60°C (except the 

strainer).

●

Use a dish brush to remove dirt from crevices or 

corners.

C

D

E