20
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
SOLEPLATE IS NOT
HEATING EVEN
THOUGH IRON IS
TURNED ON.
Connection problem
check main power supply cable,plug and
outlet.
Temperature control is in MIN
position
select adequate temperature
IRON DOES NOT
PRODUCE STEAM
Not enough water in tank
Fill water tank
Steam control is selected in
non-steam position.
Set steam control between positions of
minimum steam and maximum steam
(see “iron chart”).
Selected temperature is lower
than that specified to use with
steam.
Select a higher temperature
SPRAY FUNCTION
DOES NOT WORK
Not enough water in tank
Fill water tank
STEAM JET AND
VERTICAL STEAM JET
FUNCTION DOES NOT
WORK
Steam jet function was used
very frequently within a short
period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough
Adjust to higher temperature to steam
ironing.Put iron in vertical position and
wait temperature indicator light becomes
fixed.
THE IRON LEAKING
The temperature setting is too
low to produce steam.
The variable steam knob must be set
on“0”position until the iron is hot.
WHITE STREAKS
COME THROUGH
THE HOLES IN THE
SOLEPLATE
The soleplate has a build-up
of scale because it has not
been self-cleaned regularly.
Do the self-cleaning process. Remember
to do it at least every two weeks.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal
framework applicable in the European Union for the disposal and reuse of waste electronic
and electrical devices. Do not dispose of this product in the bin, instead going to the elec-
trical and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.
