background image

All product specifications are subject to change without notice

- 2 -

This Outdoor LoRa Gateway is designed with Semtech Technology to provide low

power and wide area (LPWA) unlicensed band wireless connection.  This gateway 

supports connectivity for wide range of Internet of Things (IOT) applications.

1     Contents of Delivery

1 x LTE 

0 dBi Antenna 

2 x Hose Clamp

1 x Surge 

Protection Cable

1 x Antenna

Extension Cable

1 x Pole 

Mounting Bracket

1 x Gateway

Rear Bracket

1 x Screw Kit

(3pcs)

1 x Screw Kit

(4pcs)

Quick Guide

1 x Installation 

Quick Guide

       1 x Outdoor LoRa Gateway 

    with water protection cap on 

           N-Type connector ports

User Manual

1 x User Manual

60 Watts PoE Adapter

(optional)

1 x DC Input 

Cable Gland

(optional)

1 x DC Input 

Connector

(optional)

1 x GPS Antenna

1 x Screw Kit

(4pcs)

Items

1

 x 

O

utdoor LoRa Gateway with water protection cap on N-Type connector ports 

Metal Caps: V2.1 HW (3 for LTE version, 2 for non-LTE version)

x Antenna Extension Cable (for 3, 8 or 9 dBi LoRa antenna, cable length 60.96     3cm)

1

 x Outdoor LoRa Gateway User Manual and Installation Quick Guide

1

 x LTE 0 dBi Antenna (only for model with LTE function)

1

 x Screw Kit (4pcs) for GPS Antenna

1

 x Screw Kit (3pcs) for Pole Mounting Bracket

1

 x DC Input Connector (only for model with 11-57 VDC function) 

1

 x DC Input Cable Gland (only for model with 11-57 VDC function) 

1

 x 60 Watts PoE Adapter (optional)

1

 x Screw Kit (4pcs) for Gateway Rear Bracket

2

 x Hose Clamp

1

 x Surge Protection Cable

1

 x Pole Mounting Bracket

1

 x Gateway Rear Bracket

1

 x GPS Antenna (cable length 43.6 cm) 

Summary of Contents for Outdoor R1 Series















Reviews: