S9600-28DX Hardware Installation Guide | 25
2.
Check for serial control availability.
Disable any serial communication programs running on the computer such as synchronization
programs to prevent interference.
3.
Launch a terminal emulator.
Open a terminal emulator application such as HyperTerminal (Windows PC), Putty or TeraTerm
and configure the application. The following settings are for a Windows environment (other
operating systems may vary):
•
Baud rate: 115200 bps
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
4.
Login to the device.
After the connection is established, a prompt for the username and password displays. Enter
the username and password to access the CLI. The username and password should be provided
by the Network Operating System (NOS) vendor.
