TIE BAR A95
-
page 9
of 19
Installation and Maintenance Manual
2 INSTALLATION
2.1 Necessary tools
2.2 A95 Installation
1 Install the cylinders by carrying out the instruc-
tions indicated in the manual and positioning the
engines as shown in the pictures indicated in point 2.
NOTICE
Do not assemble the plugs on the cylinder body
(see the picture aside).
If the plugs are already mounted, it is necessary
to remove them.
2 Position the engines in the center of the stroke
observing any convergence or divergence recom-
mended by the engine manufacturers as shown in
the picture aside. (see the pictures below).
i/2
i/2
i2
i3
i
14 mm hexagon wrench
22 mm hexagon wrench
Dynamometric wrench
Cross slot screwdriver
Loctite 270
2x
Summary of Contents for A95
Page 1: ...Installation and Maintenance manual Dr No 36010 10 12 2019 PARTNER A95 TIE BAR...
Page 14: ...Installation and Maintenance Manual page 14 of 19 TIE BAR A95 NOTES...
Page 15: ...TIE BAR A95 page 15 of 19 Installation and Maintenance Manual NOTES...
Page 16: ...UFLEX USA Sarasota FL 34243 6442 Parkland Drive...
