REMOTE
RANGE
WALK
TEST
Once the illuminator is fully installed carry out a complete range walk test and record the range
in the table below.
This information is essential for maintenance purposes to determine if the range/sensitivity is
reducing and also to record dead areas within the remote control units range due to RF
obstructions and/or RF interference.
Note:
Where a illuminator has more than one remote control, reduction in operating range may
be experienced when both (or multiple) remote controls are used simultaneously.
Descrip
ti
on
Date
Max Range
Controller 1
Controller 2
Controller 3
Dead Areas
OPERATION
9
UFO
LIGHTING
