background image

UFREE SCOOTER  

 

       www.scooter-manufacturer.com 

 

 

 

WARNING                     

 

 
 

BEFORE YOU ATTEMPT TO RIDE THE SCOOTER, PLEASE READ AND 
UNDERSTAND THE FOLLOWING: 

•NEVER RIDE THE SCOOTER ON PUBLIC STREETS OR ROADS. CHECK LOCAL 

ORDINANCES WHERE RIDING IS PERMISSIBLE. 

•MINIMUM AGE IS RECOMMENDED AT 10 YEARS OLD TO OPERATE THE 

SCOOTER. MAXIMUM RIDER WEIGHT IS 180LB. 

•ALWAYS WEAR AN APPROVED SAFETY HELMET WHEN RIDING. BE 

COOL...BE SAFE!   

*WEAR SHOES WHEN RIDING, NEVER BAREFOOTED. 

•AVOID RIDING ON GRAVEL SAND. GRASS SLICK OR WET SURFACES. SCOOTER 

IS DESIGNED TO BE USED ON DRY SMOOTH SURFACES. 

•NEVER RIDE SCOOTER OVER CURBS OR JUMPS. THIS SCOOTER IS NOT 

DESIGNED FOR THIS TYPE OF RIDING. THE RETAILER, DISTRIBUTOR, 

IMPORTER, AND MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY 

INJURIES TO THE RIDER OR DAMAGES TO THE SCOOTER THAT OCCUR FROM 

THIS TYPE OF RIDING OR ACTIVITIES. 

•POWER IS AT FULL POWER WHEN FOOT OPERATED POWER SWITCH (THROTTLE) 

IS ENGAGED. BE PREPARED. 

  •BRAKE IS DESIGNED TO CONTROL SPEED AS WELL AS FOR STOPPING. 

•NEVER RIDE THE SCOOTER WITH MORE THAN ONE PERSON. MULTIPLY RIDERS 

COULD LEAD TO LOSS OF CONTROL. 

•KEEP HANDS, FEET, HAIR, AND SHOESTRINGS AWAY FROM ALL MOVING 
PARTS. 

•NEVER LEAVE CHILDREN UNATTENDED WITH THE SCOOTER. THIS COULD 
LEAD TO POTENTIAL HAZARDS! 

•FAMILIARIZE YOURSELF WITH THE SCOOTER AND CHECK ALL FASTENERS FOR 

TIGHTNESS BEFORE EACH USE. 

•DO NOT STORE BATTERIES NEAR HIGH TEMPERATURES, BATTERIES CAN 
EXPLODE. 

•DO NOT EXPOSE CHARGER TO MOISTURE OR USE IF DAMAGED. REGULARLY 

CHECK THE CORD. PLUG & ENCLOSURE FOR ANY DAMAGE THE CHARGER 

MUST NOT BE USED UNTIL THE DAMAGE IS REPAIRED. 

•NEVER OPERATE SCOOTER WHILE IMPAIRED. 

CAUTION: IT IS RECOMMENDED TO ALWAYS PUSH START THE SP007 TO 

REDUCE THE START LOAD ON THE MOTOR. YOUR SCOOTER MOTOR WILL 

HAVE A MUCH LONGER LIFE WITH PUSH ASSISTANCE. CAUTION: 

ELECTRICALLY OPERATED TOY! RECOMMENDED TRANSFORMER MUST BE 

USED. CAUTION:  THE TRANSFORMER IS NOT A TOY!  RISK OF ELECTRIC SHOCK! 

CAUTION: CHARGER FOR DRY LOCATION AND WDOOR USE ONLY! 

  CHARGE BATTERY AFTER EVERY USE

 

 

 

 

Summary of Contents for FS-E07













Reviews: