Connect to UgCS SkyHub Using Ethernet
Parameters for wired connection are:
• IP address:
192.168.0.33
• Port:
22
• Username:
root
• Password: <empty>
UgCS SkyHub runs DHCP service onboard, therefore, the PC’s IP address will be assigned
automatically after connection.
Access to Onboard File System
One may use any SCP client to access the UgCS SkyHub file system. For example, one may
use WinSCP.
Figure 12.1 — WinSCP settings
While pressing the Login button one may choose between login via SCP (to have access to the
file system) or opening with PuTTY (for SSH access).
• Home directory for root user:
/home/root/
• MicroSD root:
/run/media/mmcblk1p1/
• Configuration file:
/etc/skyhub/skyhub.conf
• Logs directory:
/run/media/mmcblk1p1/skyhub_logs/
12 • Preparation
UgCS SkyHub User Manual
Copyright © 2019—2021, SPH Engineering
45
Revision 5 • November 2021
