Instructions for use
(rev 150620)
e.ON
UGIN DENTAIRE
8
3.2.
CONDITIONS OF USE, TRANSPORT AND STORAGE
▪
Authorised conditions of use
-
Ambient temperature: +10°C to +40°C.
-
Humidity range: maximum relative humidity 80% for temperatures until 31°C, without condensation
and decrease linear until 50% to 40°C, without condensation.
-
Ambient pressure: up to an altitude of 2000 m above sea level.
▪
Authorised conditions of storage
-
Ambient temperature: -20°C to +65°C.
-
Humidity range: maximum relative humidity 80%.
-
Ambient pressure: up to an altitude of 2000 m above sea level.
▪
Conditions to transport
-
Wait the complete cooling before packing/transporting.
-
Use the original packaging only, with the protective elements (polystyrene...).
-
Take hold the furnace by its base, never lift by upper part of furnace.
-
For transport, the furnace must remain in an upright position: not horizontal position.
-
Install the furnace in the packaging with the protective elements. Also protect the accessories for
transportation.
NEVER LIFT BY UPPER PART OF FURNACE
: risk material damage.
For transport, the furnace must remain in an
upright position: NOT HORIZONTAL POSITION.
Heating elements may be damaged in horizontal position due to vibration/shock.
3.3.
ACCESSORIES
▪
Accessories delivered
with the furnace
(included in the packaging):
ACCESSORIES
QUANTITY
UGIN CODE
-
Tray for sinterizing
3
FCE07SIN0030
-
Tray for sinterizing cover
1
FCE07SIN0023
-
Box of zirconia pearls
1
FCE03SIN0001
-
Support
1
FCE07SIN0015
-
Wrench
(for tighten the heating elements)
1
---
-
Allen wrench
(number 3 and 4)
2
---
